How to reset Netgear Router to factory setting

If you forget your user name and password or begin to experience connectivity problems with your Netgear router, you may need to reset your Netgear router to the default factory setting.

You can reset your Netgear router to the factory settings from within the router manager. The reset procedure removes all user-configured settings and returns the router to the original factory settings. For this reason, only reset the router if you encounter problems that can't be solved with other methods.

So find here Netgear router support  tips to easily reset your Netgear router, and following steps are -

Step 1: Check that your Netgear router is properly connected with your system or not. If it is OK, then press reset button on Netgear router for at least 10 seconds. The 'test' light should flash during this process.

Step 2: Now open browser and enter Netgear's IP address into the address bar. Generally, '192.168.0.1' is the Netgear router IP address but you can find specific IP address in Netgear router manual.

Step 3: Now enter your default username and password to log in to router. Find here some Netgear router troubleshooting tips.

Step 4: Click 'Erase' button under the 'Revert to Factory Default Settings'. This process will erase all your previous changes that have been made to the router and restore the configuration settings to factory setting. Don't interrupt the process until the process is finished.

Once the router's 'test' light has stopped blinking and the configuration page you are on has refreshed, the router has been reset.

Feel free to get online technical support to fix your computer problems. Just Call on Toll-Free number(1-866-541-1792) & get 24*7 expert help for online diagnostic and troubleshooting.

Find here some additional tips for how can you configure Wi-Fi router.

How to Access Netgear Router Login

If you are setting Netgear router the first time, or have reformatted your computer than you must login to your router to access/change the settings. 

Below are the steps that will help you access or modify your Netgear Router Settings

1. Power on your computer
2. If you are setting up the router for the first time or want to change the configuration, connect your desktop/laptop (if you only have one computer) to the router with an Ethernet cable. 
3. If you already have a wireless connection set up (with a desktop already connected to the router with an Ethernet cable) and just want to change the configuration settings from a second computer, you don’t need to use an Ethernet cable again.
4. Launch your internet browser viz. Internet Explorer, Google Chrome, or Mozilla Firefox etc. (whichever you use).
5. Type ‘192.168.1.1’ or ‘192.168.0.1’ (without quotes) in the address bar of the browser and hit ‘Enter’ on the keyboard.
6. This will direct you to the router login page, prompting you to enter the username and password. If it doesn’t bring up the login page, type ‘www.routerlogin.net’ (without quotes) in the address bar and hit ‘Enter’.
7. Type in the username and password in the respective fields and click on OK/Login whatever you see on the window to login. Check your router docs. for the username and password, or if you have changed the information then enter the new one.
8. When you see the configuration screen, setup or modify your configuration settings as desired
9. When done with the settings, exit out the window by clicking on the ‘X’ button. This will log you out automatically of the configuration screen.
   

Additional Tidbits:

You can also try these IP addresses viz. ‘192.168.10.1’, ‘192.168.100.1’, ‘192.168.0.5’, ‘10.1.10.1’

You must check your login information such as username and password before entering anything. The information usually comes printed on a sticker at the bottom of the Netgear router. Usually the username is ‘admin’ and the password is ‘password’ (both without quotes) but you must check it with your router doc. or unless you have changed it.

If you are setting up your router for the first time and the password that came with the router doc. doesn’t work, you can try ‘Password’ with ‘P’ capital or ‘1234’ or ‘admin’. 

If you already have your wireless router setup and have got your computer reformatted, you don’t need to login to the router. Simply connect to the wireless connection using your security key such WAP. This will be applicable in the case if you don’t want to modify the already configured settings.

Vtechsquad has a special shell for troubleshooting all your Netgear router support related problems including Wi-Fi setup, networking, security, and upgrade etc. If you are facing problem with your Netgear Router Setup and Configuration, You can reach V tech-squad online technical support at their Toll Free No +1-866-541-1792 For US/CA.

V tech-squad Inc. ( www.vtechsquad.com ) is a leading provider of online computer support, virus removal, home networking support, phone support, and ipad support. V tech-squad has a team of certified technicians who cumulatively have more than 100 years of experience in desktop support. V tech-squad is currently solving hundreds of customer issues a day with best resolution rates in the industry. V tech-squad management is formed by IIT alumni who are ex-employees of Microsoft and IBM. Founded in 2010 V tech-squad is serving customers around the world including United States, Canada and India.

How to Configure a Netgear Wireless Router

Wireless routers is designed to allow wire-free Internet connectivity for multiple computers for home or business network within a selected/limited area. Before using a router, you have to configure it to ensure that all settings are compatible with your Internet Service Provider and mode of Internet access. The article is intended to guide you configuration of your Netgear wireless router.

1.       Connect your modem to the Netgear wireless router with an Ethernet cable. Turn off and connect your modem's power before connecting the device to your wireless router. 

2.       Connect the Ethernet cable that was connected to your modem into the "Internet" port on the back of your Netgear wireless router. 

3.       Plug your computer and the Netgear wireless router with an Ethernet cable. Shut down your computer before plugging it to your wireless router.

4.       Plug blue Ethernet cable into your computer's Ethernet jack. Connect the other end on the back of your Netgear wireless router. 

5.       Power up your modem, then wait at least 2 minutes. This allows it time to connect to your Internet Service Provider's (ISP) server. 

6.       Connect the Netgear AC power adapter into the Netgear wireless router and a power outlet. The AC power adapter plugs into the back of the wireless router in a black-colored port labeled "Power." Wait at least 2 minutes for your wireless router to connect to your modem. You will know that it has successfully connected if all of the status lights on the front of the wireless router are on. Finally, turn on your computer.

7.       Open your Web browser type in the wireless router's address. The Netgear wireless router addresses is http://192.168.1.1. 

8.       Input the login details. The default user name is "admin," and the password is "password." 

9.       Once you log into the router, a Setup Wizard will load and ask if you want it to detect your Internet type. Click the "Yes" radio button, then click "Next." Once you have completed the wizard, configuration is complete.

Feel free to get online technical support to fix your computer problems. Just Call on Toll-Free number(1-866-541-1792) & get 24*7 expert help for online diagnostic and troubleshooting.

How to Setup and Configure Your Belkin Wireless Router for Remote Desktop

Owing to the massive popularity of home networking services, wireless routers have rapidly gained major foothold in businesses and even households also. A wireless router is designed to allow wireless communication between a user and its PC for internet access or playing media files etc. within a selected/limited area. For that matter, Belkin Wireless routers present an excellent choice for enjoying internet access wireless.  

Though Belkin Wireless routers support all the OS (operating system) versions, still, Windows XP users may experience problems setting up Windows Remote Desktop. With Windows Remote Desktop, you can access your machine anytime provided that you have setup your computer correctly. For Windows XP, you need to manually setup the Belkin router and give authorization for a remote desktop connection. If not setup correctly, the Belkin router will not let you access the remote connection. The article is intended to guide you about setup & configuration of your Belkin Wireless routers.

1.         Click "Start," then "Run,"  type "CMD" in search bar and press "enter."

2.         Type ipconfi  and press enter. Your IP address is the set of numbers across from "IP Address" Write this sequence of numbers down, including the decimals.

3.         Open the web browser(Intenet Explorer, Mozilla Firefox, Google Chrome), and type "http://192.168.2.1" press enter

4.         Click "Login" It will ask for the login details and then "Submit." There will be no password needed unless you have designated one at an earlier date. In that case, enter the password you gave the router, and click "Submit."

5          Click "Virtual Servers" located under the "Firewall" list, then click "Enabled."

6.         Enter "Remote Desktop" as the general description name.

7.         Type "3389" in both fields labeled "Inbound port."

8.         Select "Both" under TCP and UDP options.

9.         Click on the 'Private IP address" box, and enter IP address you wrote down in Step 2.

10.       Type "3389" in both fields labeled "Private Port." Click "Apply changes," and exit the web browser.

Feel free to get online technical support to fix your computer problems. Just Call on Toll-Free number(1-866-541-1792) & get 24*7 expert help for online diagnostic and troubleshooting.

How to do Belkin Router Setup?

Now a days Wireless Router Setup become most common Problem for households and businesses. Most of the problems you may face while configure Belkin router setup, Linksys router. Below the few steps help you to configure Linksys router and belkin router.

The first step you need to do hook up your Belkin router by connecting the write ports with the accurate required cables.

Next the most import step click your web browser which is you are using whether it is Mozilla any other browser.

Type 192.168.2.1 In the address bar of your web browser, then enter.

As soon as you will do these steps then in your screen pop up will come menu of Belkin router.
Now you have to choose connection type .

As soon as you click, you need to enter password and in case you have not changed it yet, you need to leave the required field blank.

The PPPOE screen will ask you for a password and username. This username and password should be which is provided to you by your internet connection service provider. Now you need to do fill in the required fields with the all information and then go to select the button now you can do apply changes Your router has now been successfully configured.

Feel free to get online technical support to fix your computer problems. Just Call on Toll-Free number(1-866-541-1792) & get 24*7 expert help for online diagnostic and troubleshooting.